upgrading BLU-ICE from release 3.0 to 4.5

| | Comments (0)
The last few days I have been primarily focussed on getting the latest BLU-ICE (version 4.5) control software running on our graphics1 computer. I have documented the process fairly well so when all is said and done I should be able to write a back-from-the-dead script so we can go from a bare machine to a fully operational beamline control computer within a very short time. I have documented my progress with some screen shots.

... BLU-ICE 4.5 Hutch Tab...

... view of the Hutch tab in the new BLU-ICE 4.5 showing the changes that I've made so it reflects the motors and detector that we have at the SIBYLS beamline...

I've added some tcl code to calculate the resoltuion at the edges and in the corners when our ADSC Quantum 315 area detector is offset in the two theta direction:

... BLU-ICE 4.5 Hutch Tab...

... desc...

Here is the new Sample tab, introduced sometime between release 4.2 and 4.5:

... BLU-ICE 4.5 Hutch Tab...

... desc...

The Collect Tab:

... BLU-ICE 4.5 Hutch Tab...

... desc...

The Screening Tab:

... BLU-ICE 4.5 Hutch Tab...

... desc...

I'm having some problems with the Scan tab as the periodic table is only displaying the Mo-k edge:

... BLU-ICE 4.5 Hutch Tab...

... desc...

Leave a comment

ALS Ring Status

loading ...
als current sparkline

Funding

Archives

Powered by Movable Type 5.2.13

March 2017

Sun Mon Tue Wed Thu Fri Sat
      1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30 31  
‚Äč